B-Cure Laser Pro

The warranty covers defective parts and labour. The warranty does not cover the batteries, and the charger. In the unlikely event of a fault, please contact customer service.

The device should not be aimed directly at the eyes. Protective goggles are not required.

There is no reason to prevent you using B-Cure Laser together with anticoagulants.

Other treatments can may be combined with B-Cure Laser.

There is no need to hold any button. You should hold down the left operating button, and, at the same time, press on the main operating button. When you let go of both buttons simultaneously, you set automatic operation of the B-Cure Laser.

B-Cure Laser is safe for use by heart patients, and those with pacemakers.

Certainly. You can finish treating your knee, and move to your neck, and then if required, treat a burn on your hand. There is no limit to the number of treatments, and the treatment can be lengthened to a quarter of an hour on one particular spot. We recommend thoroughly treating one spot, and then moving on to the next, but you can certainly treat a number of locations simultaneously.

The directive is intended to prevent the increase of pain, in cases where inflammation has developed. If, after a one-and-a-half-minute treatment, no increase of pain is felt, it is recommended, for the following treatment, to go up to the full treatment protocol of six minutes, twice a day. If pain is felt, then the length of the treatment should be increased gradually, by approximately one additional minute per day, for each spot to be treated, until the full duration is reached.

In case of acute pain, it is recommended that you wait five minutes between each treatment, and to apply treatment as many times as possible. For the treatment of long-term pain, it is recommended to conduct two or three treatments every day, and then more if it suits the patient. There is no such thing as an overdose.

One has to place the device not through clothing, bandage, etc., except on open wounds, which should be treated from a distance of approximately 1cm from the area to be treated, in order to maintain hygiene. It is important not to press the device too strongly against the skin, as it will stop working. The B-Cure Laser should be placed lightly and motionless at a perpendicular angle to the direction of the area to be treated.

After determining the desired spot for the treatment, the B-Cure Laser should not be moved during the treatment, until you continue to the next treatment spot.